איפוס ביוס

[admin]

Steps

1. Power down your PC.
2. Locate a
   rocker-style switch at the back of your PC (if applicable), and switch it
   from the on position (I) to the off position (O).
3. Find the 3-pin
   jumper near the battery, typically labeled "clear cmos" or
   "reset bios".
4. Remove the jumper
   from the default position (typically connecting the 1st and 2nd pins).
5. Replace the jumper
   to connect the 2nd and 3rd pins.
6. Push the power
   button on the front of your PC once.
7. Wait a minute.
8. Return the jumper to
   its default position, connecting the 1st and 2nd pins.
9. Move the
   rocker-style switch at the back of your PC (if applicable), to the on (I)
   position.
10. Power on your PC
    with its front power button.

If it doesn't work go to
alternate options

 

Alternate
Method 1

1. Locate a
   rocker-style switch at the back of your PC (if applicable), and switch it from
   the on position (I) to the off position (O).
2. Remove the CMOS
   battery. This should be a regular 3V, round, flat watch battery.
3. Wait at least 5
   minutes.
4. Reinsert the CMOS
   battery.
5. Move the
   rocker-style switch at the back of your PC (if applicable), to the on (I)
   position.
6. Power on your PC
   with its front power button.

 

Alternate
Method 2

1. Turn on your
   computer and press the key on your keyboard to enter the BIOS. This is
   typically the Del (delete) key. Pre-built systems from major manufacturers
   may use a function key such as F1, F2, or F10.
2. Go to the last tab
   or page of your BIOS.
3. Select an option
   similar to "restore factory settings".
4. Save your changes
   and confirm your selection if necessary. This will often be combined with
   the process of exiting a BIOS. Some BIOS types may have this as a separate
   option such as "F10: Save Changes".

 

Tips

• Don't forget to
  configure your BIOS after this process. Without any custom configuration,
  most system should still function adequately with their default settings.

 

Warnings

• If you don't know
  how to configure your BIOS, don't mess with it. You can damage your PC.
• Make sure your
  computer is unplugged before removing the case. Ground yourself before
  handling any components inside a PC to reduce the risk of electrostatic
  discharge from damaging your PC.

 

takala2009-3-24 18:56:39

[מאת]

תגובות