פירוש צפצופים בהדלקת המחשב –
AMI BIOS ERROR BEEP CODES
1 Beep – Memory Refresh Failure (check memory)
2 Beeps – Memory Parity Error in first 64KB block (check memory)
3 Beeps – Memory Read/Write Error in first 64KB block (check memory)
4 Beeps – Motherboard timer not functioning (possible motherboard replacement)
5 Beeps – Processor Error (may need replacement Processor)
6 Beeps – Gate A20/keyboard controller failure (possible motherboard replacement)
7 Beeps – Processor Exception Interrupt Error (may need replacement Processor)
8 Beeps – Display Memory Read/Write Failure (reseat or replace video card)
9 Beeps – ROM checksum Error (replace BIOS chip or motherboard)
10 Beeps – CMOS shutdown Read/Write error (possible motherboard replacement)
11 Beeps – Bad Cache Memory – test failed (replace cache memory)
Phoenix BIOS ERROR BEEP CODES
Phoenix BIOS beep codes are a series of beeps separated by a pause, for example:
beep — beep beep — beep — beep beep would be 1-2-1-2
1-1-4-1 – Cache Error (level 2)
1-2-2-3 – BIOS ROM Checksum
1-3-1-1 – DRAM Refresh Test
1-3-1-3 – Keyboard controller test
1-3-4-1 – RAM Failure on address line xxxx (check memory)
1-3-4-3 – RAM Failure on data bits xxxx of low byte of memory bus
1-4-1-1 – RAM Failure on data bits xxxx of high byte of memory bus
2-1-2-3 – ROM copyright notice
2-2-3-1 – Test for unexpected interrupts
AWARD BIOS ERROR BEEP CODES
There are 2 main beep codes for the Award BIOS:
one long beep and two short beeps – Video error (reseat or replace video card)
two short beeps – Non-Fatal Error (reseat RAM, check other components)
לרשימה המלאה יש לעיין בלינק הבא:
takala2008-12-3 17:24:37