ההוראה ביצעה ההפנייה לזכרון

פורום › פורומים › פורום תמיכה בתקלות מחשבים › ההוראה ביצעה ההפנייה לזכרון

מוצגות 1 תגובות (מתוך 1 סה״כ)
  • מאת
    תגובות
  • 9 בדצמבר 2008 בשעה 02:35 #13546
    admin
    מנהל בפורום

     

    The instruction at — referenced memory at –. The memory could not be read

    התופעות השכיחות:

     

    במהלך הפעלת תוכנה מסויימת – לטפל נקודתית בתוכנה מסויימת

    אפשרות לוירוס – נעדכן את האנטי וירוס ונבצע סריקה מלאה.

    סקטור בכונן הקשיח פגום –  נבצע  chksk /f

     

     

    שאלות שצריך לשאול –

    http://ask-leo.com/how_do_i_fix_the_instruction_at_reference d_memory_at_the_memory_could_not_be_read.html

    הצעות לפתרונות-


    Question

    I receive the following error: 'The Instruction at 0x####### referenced memory at 0x#######. The memory could not be 'read'

    Answer

    Disable Background Applications

    The most common cause of this error is a background application interfering with the game. Please follow this guide to shut down all background applications.

     

    Update your System

    1. Source-engine games rely on DirectX to function properly. Please see the Checking DirectX Settings topic for instructions to update DirectX on your machine.
    2. Outdated or corrupted sound and video drivers may also cause problems – please see the Updating Drivers topic for instructions to update your drivers for these components.
    3. Please follow the links below to update your system's operating system, motherboard drivers, and BIOS:
    4. Verify GCF Cache Files to ensure the issue is not related to a corrupted download
    5. Some users have reported that this issue may be resolved by running a full system file check to repair damaged operating system files:

    1.      Go to the Start button

    2.      Select Run…

    3.      Enter cmd and click OK to open the command console

    4.      Enter sfc /scannow to check your system files

    5.      If prompted, repair any damaged files

     

    Disable System Modifications

    1. Make sure that you are not overclocking your system.
    2. Disable and/or uninstall any refresh rate-forcing programs.
    3. Please temporarily uninstall 3rd party video or audio codecs (the K-Lite codec pack is known to cause this issue).
    4. If you have an ATI Graphics card, please uninstall ATI-ACE, ATI-SMART, Trueform and Catalyst AI – Disable VPU Recover for testing.

     

    Advanced Troubleshooting Steps

    Please reboot and test after completing each of these steps to determine whether the issue has been resolved.

    1. Add this launch option in your game's launch properties to test the game in windowed mode:

    -window +mat_forcehardwaresync 0

    More information about setting launch options can be found in the Setting Game Launch Options topic.

    1. Page file: Try turning off your system paging file (you have to reboot) and setting your page file for 1x or 2x the amount of RAM being used. This setting can be found under Control Panel > System > Advanced > Performance > Advanced > Virtual Memory
    2. If you have an language other than English set for your Operating System, make sure that you are not setting the console key to an character which Steam will not recognize (§ for example is not valid)
    3. Disable all IM programs and do not alt-tab to your desktop, swapping the game out may trigger this problem.
    4. If you are using two or more memory modules, try running with only one module and see if you still have this problem. Reducing the number of modules will effectively speed up your memory timing. If the game runs ok with one module but not two, then you have a motherboard timing problem and you will need to make some changes. Please read your motherboard manual before making any changes.
      • Relax the memory timing some motherboards have "conservative" timing or you can manually increase CAS and increase prefetch. If CAS is set to 2.0 increase it to 2.5. If Prefetch is set to 6, increase it to 7 or higher (up to 11).
      • Slightly increase the memory core voltage if your motherboard supports this option, consult your motherboard manual. Raising the voltage will effectively speed up the memory, but will also increase the heat.
      • Make sure the Case Latency in your BIOS corresponds with the CAS rating which your RAM supports – please see the Wikipedia article linked below for detailed technical information on working with RAM:
        http://en.wikipedia.org/wiki/Dynamic_random_access_memory

     

    takala2009-5-26 8:20:17

  • מאת
    תגובות
מוצגות 1 תגובות (מתוך 1 סה״כ)
  • יש להתחבר למערכת על מנת להגיב.